| | |  | Acupuncture Supplies | Home » » » Zircon Studsensor Pro LCD Wood and Metal Finder | | | | | | | Description: | | StudSensor Pro LCD quickly and easily locates the edges of wood and metal studs and joists behind walls, floors, and ceilings. Its easy-to-read display screen indicates stud edge, the patented spotlite pointing system shines a beam of light on the wall to | | | Features: | |
• Stud Scan mode locates the edges of wood or metal studs up to 3/4 inch (19 mm) deep.
• DeepScan mode doubles the scanning depth to 1 1/2 inches (38 mm).
• Easy-to-read LCD display indicates when a stud edge is approached and patented spotlite pointing system and audio tone signals when the stud edge is reached.
• Wirewarning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep.
• Patented TruCal technology calibrates to any wall's density and the TruCal icon indicates when the tool is ready and calibrated.
| | | Product Details: | | | Product Length:
| 6.0 inches | | Product Width:
| 12.0 inches | | Product Height:
| 4.0 inches | | Product Weight:
| 1.0 pounds | | Package Length:
| 10.0 inches | | Package Width:
| 4.5 inches | | Package Height:
| 1.4 inches | | Package Weight:
| 0.5 pounds | | Average Customer Rating:
|  based on 9 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 9 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
2 of 2 found the following review helpful:
 Complete waste of money - avoid this product!Jun 04, 2008
By tokamak
The normal stud scan mode won't hold calibration worth a damn... and in the 1 and 10 chance you can move it 5 inches without it blinking due to "bad calibration" you get inconsistent hits all over the place.
"Deep scan" mode seems to work better but thats only because it disables the calibration feature but it has the same problems the other scan mode has. Totally inconsistent hits!
I'm trying to finish a quick project before I return this product... I wish I could say it was DIFFICULT to use, but its IMPOSSIBLE to use! I can't find a single stud with any certainty! Its back to the 'ol hammer and ear method until I can find something better. Doesn't this company do any sort of Quality Control??
1 of 1 found the following review helpful:
Waste of spaceJan 13, 2009
By ugh not again
This product is a waste of space. 1 star is too generous but I dunno how to remove the star and at least it finally worked. I should have read the reviews here before I bought this thing. Like others, this thing needs to reset itself, but as soon as you try to move it across the drywall, it loses it and starts buzzing an error and you need to stop, reset, and try again. I tried moving my hand really slowly and made sure the device maintained full contact with the wall. Took several trial and errors but it did finally detect a stud. Very irritating to use and requires a LOT of patience. Too sensitive to motion, not worth the price.
1 of 1 found the following review helpful:
Horrible with a capital "H"Sep 02, 2008
By J. Lemieux
I bought this unit from Home Depot because it's the only brand of stud-finder they seem to carry in my area. It simply does not function. When I held the unit to the wall and pressed the button to "calibrate", all I got was a flashing screen and absolutely no stud-finding. I thought perhaps the batteries that it came with were poor so I changed them. Same result. Stay away from this POS.
1 of 1 found the following review helpful:
Useless even at the price one paid for it !!Jun 18, 2008
By A. Waheed
"avid reader"
Bought it at Lowe's at the $24.95 sticker price thinking it must be a better one compared to the cheapest $10.95 model.. I was wrong :).. this one turned out to be a useless piece of equipment which took me atleast an hour more to get the mirror up on the wall compared to how much it would have taken me otherwise.. Novice user, so came here to confirm the findings and viola, I wasn't the only one :)
1 of 1 found the following review helpful:
Maybe it's just me...Feb 13, 2008
By Kamouflage
"aka The Artist"
I needed a stud sensor to build a closet. So I got this one.
Maybe I am not using it right, maybe the sensor is too sensitive or not too sensitive.
Long story short, I couldn't make it work. It is too flaky. It's a dud.
See all 9 customer reviews on Amazon.com
| | |
|