Traction Mat Heated Floor Mat is designed to act as an entrance mat. This heated floor mat is built with non-slip, UV protected rubber, and is designed to be left out for the entire winter season. This non-slip mat is madeup of an electrically operated heating element sandwiched between two protective surfaces of non-slip rubber, making them as durable as automobile tires and allowing them to endure harsh wear. These entrance mats plug directly into any standard 120V or 240V outlet using its own equipment leakage circuit interrupter(ELCI). Traction Mat eliminates snow and ice accumulation around the facility.Portable, designed to lie on top of existing surfaces. Place a traction mat over existing entranceways, stairs, loading docks, handicap ramps, rooftops, and many other surfaces, to provide a clean and safe passageway for foot or wheelchair access. Heated mats are a better solution for slip prevention. These rubber floor mats continuously melt snow and ice keeping surfaces constantly clear and safe. In addition, the non-slip mats are designed with a continuous chevron pattern to provide extra traction. The traction mats are a better alternative than calcium chloride. Salted entranceways leads to messy floors indoors as calcium chloride gets tracked inside by foot traffic. In addition, heated outdoor mats help preserve sidewalks, as calcium chloride will eat away at walkways over time.Product specifications: Surface Thickness: 1/4", Chevron Height: 1/8", Material: Reinforced UV stabilized natural rubber. Heating Element: Voltage: 120Vac or 240Vac, Power Density: 40 Watts/SF. In-line Safety Device/Power Cord: Service Voltage: 120Vac or 240Vac, Circuit breaker rating:15A, ELCI trip level: 27mA, Cold lead length: 6', Cord gauge: 14/3 SJTW.

This heated mat is portable - No Expensive Installations.

Safer Walkways.

Traction mats are durable.

Non-slip, UV protected rubber.

Better solution for slip prevention.